This unit is extremely easy to use, simply connect the positive & negative input wires to the terminals as shown on the picture above & do the same for the output wires.
As default the unit is supplied set to give 12V output (regardless of what the input voltage is - as long as it is no more than 12V)
To adjust the output voltage you will need a small screwdriver & multimeter. Simply connect the multimeter to the output terminals with a suitable battery connected to the input & adjust the multi-turn potentiometer to get the desired output voltage, (anti-clockwise to reduce the output voltage.)
Once the output voltage has been set, it will remain at that level regardless of the input voltage - unless the input voltage is within 0.3V or above the output voltage, in which case the output voltage will increase.
| Input Voltage | Max output current (12V) | Max output current (24V) |
| 4.8V | 0.8A | 0.4A |
| 6V | 1.0A | 0.5A |
| 7.2V | 1.2A | 0.6A |
| 7.4V | 1.2A | 0.6A |
| 8.4V | 1.4A | 0.7A |
| 9.6V | 1.6A | 0.8A |
| 11.1V | 1.9A | 0.9A |
| 12V | - | 1.0A |
Weight: 14g
Dimensions (L x W x H): 44 x 30 x 14mm