PIC-based switch which provides two separate switched circuits from only one proportional R/C channel. Power for the loads comes directly from the receiver battery pack (4.8v to 6v). Each of the two outputs can be driven as either Latching (Memory) or Non-Latching (Momentary) switches; 300 mA (0.3A) max load per switch. For the control of micro-horn or micro-whistle, micro smoke generator, lights etc. Case size only 34mm x 24.5mm x 16mm. Simple solder connection to loads. NOT suitable for ON/OFF switched channels e.g. 'Retract gear'