This unit is extremely easy to use, simply connect the positive & negative input wires to the terminals as shown on the picture above & do the same for the output wires.

To adjust the output voltage you will need a small screwdriver & multimeter. Simply connect the multimeter to the output terminals with a suitable battery connected to the input & adjust the multi-turn potentiometer to get the desired output voltage, (anti-clockwise to reduce the output voltage.)

Once the output voltage has been set, it will remain at that level regardless of the input voltage - unless the input voltage drops to within approx 0.3V of the output voltage, in which case the output voltage will decrease.

Input: 10.5 -40V

Output: 1 - 9V

Output Current: 6A (max 7A)*

Weight: 48g

Dimensions (L x W x H): 68 x 43 x 21mm

* Maximum Current Output could be increased up to 8A but this require additional ventilation which is not supplied