Chargers / Power Supplies
- Home
- Chargers / Power Supplies
Items 76-90 of 183
-
Power Supply - output 13.8 V DC 30,000mA (30 Amps) Mercury£67.50Out of stock
Desk top design with 4mm ring sockets output.
Supplied with mains lead. -
Power Supply - output 600mA (0.6 Amps) selectable voltages 3 / 4.5 / 5 / 6 / 7.5 / 9 / 12£6.99
Energy efficient switch-mode power supply gives up to 600mA with a variable output of 3V to 12V. Suitable for most low power electronic products such as MP3 players, PDA etc.
-
Deans Power Paraboard (PB6-XH-T)£15.95Out of stock
Charge 1-6 batteries simultaneously
Charge batteries 2s-6s
Max current: 40A
Voltage: 0-22.2V
DC Cable: 12AWG / 20AWG -
Techno-line BC-700 (9in1) Intelligent Battery Charger for 1-4 AA/AAA NiMH NiCd£31.95Out of stock
Works with all NiCd and NiMH “AA” and “AAA” Rechargeable Batteries
All Modes Automatically Default to 200mA Charge (the optimal setting for prolonging battery life)
Charge Both “AA” & “AAA”
Rechargeable Batteries Simultaneously Overheat Detection to Protect Over-Charging -
Vapex FAST LCD Charger for AA/AAA NiMH Batteries (with USB)£12.50
1.5~2 Hours for AA Batteries, 30 Minutes for AAA Batteries
Worldwide Use Power Supply
Car Adapter Included
DC 5V USB Charger Included
Batteries not included -
Balance lead adapter board for 2s-6s JST-XH£2.50Compatible virtually with any LiPo, Life, Balance Charger with a 6S Balance Port
-
Parallel adapter for 1-12 1s LiPO batteries JST-PH type£3.99Out of stockCompatibile virtually with any LiPo, Life, LiIo Balance Charger with a 6S Balance Port
-
Micro Paraboard Charge Board for 1s JST-PH or Micro Molex£3.99for up to 6x 1s JST-PH (MCPX)
for up to 6x 1s Micro Molex (Nano CPX, MCX, Molex PicoBlade 1.25mm, Micro JST-PH) -
5A (max 7.5A) Universal Battery Eliminator Circuit (UBEC) KingMax£8.75Out of stock
Input: 6v-16v
UBEC Output: 5V or 6V 5A (Max 7.5A)
Quiescent current: 15mA
Size: 39mm x 27 mm x 15.5 mm
Weight: 21.3 g -
1,000mA / 2,000mA Smart Charger for 6-12V NiMH NiCd Airsoft Battery Packs£15.99Out of stockCharges 5, 6, 7, 8, 9, 10 cell NiCd or NiMH battery packs. (6.0V, 7.2V, 8.4V, 9.6V, 10.8V, 12V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. 1,000/2,000mA (1A/2A) selectable charging current Mains 230V UK 3-pin plug (Batteries sold seperately)
-
Panel mount Battery voltage display with switch & Built-in 5A UBEC£12.50Out of stockInput voltage: 6-13V; Output voltage: 5.2/6V (Factory default voltage: 5.2V ); Output current: 0-5A ( MAX: 8A ); Weight: 40g; Size: 59 x 26.4 mm (front panel) 39 x 22.4 x 30 mm (case)
-
Power Supply - output 13.8V DC 40,000mA (40 Amps) Mercury£85.00Out of stock13.8V Bench top power supply. Electronic voltage control & short circuit protection. Output vis red and black ring terminals. Ideal for a variety of applications including CB radios.
-
1000mA & 1500mA LiPO/Li-Fe Charger for 2S/3S LiPO & LiFePO4 Batteries (complete with PSU)£15.99
Excellent, simple to use charger, switchable between
Lipo (lithium polymer) & LiFe (lithium ferrite) battery
types, auto shut down once charged.Supplied complete with mains power supply.
-
1 Cell LiPo Mini USB ChargerAs low as £1.50
3.7V Single Cell Charger, Charging status LED , Mini USB socket for power in.
Dimesnions : 22mm x 17.5mm
-
700mA Charger for 1S-3S (3.7V/7.4V/11.1V) LiPO and LiFePO4 Batteries Vapex£14.99Out of stockCombo Balance Charger with build-in Power supply