Enables you to use the power from the ESC battery to power the receiver. If using more than 2 servos its recommended to use an UBEC to avoid overloading the BEC preinstalled in most ESCs. Input: 6.6v to 32v - JST (BEC) Female. Output 5v or 6v - JR/Hitec Male. 5A Max 7.5A
5A UBEC is a switch-mode DC-DC regulator supplied, it works with a 2-6 cells lithium battery pack (or 5-24 cells NiMh /NiCd battery ) and it outputs a consistent safe voltage for your receiver, gyro and servos.
Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is higher.
- Output Voltage: 5V/5A or 6V/5A (Changeable with an output-voltage select switch )
- Continuous output current: Max 7.5Amp continues（<10S）
- Input: 6.6V - 32V
- Mode: Switch-mode
- Dimension(mm): 40X22X7 (excluding wire)
- Weight: 15.5g (excluding wire)
- Total Weight:19.4g
Features
- The output is powerful.
- With the output short-circuit protection function.
- A metal shield covers almost electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference.
- Shows the working status with an indicator(LED),Lights when the output is in normal range.