|
Measuring range |
DC 0.00 - 99.9V 0.00 - 50A |
|
Measurement accuracy |
voltage ± (0.3% + 2 digits) current ± (1% + 2 digits) |
|
Operating temperature |
-10℃~65℃ |
|
Lead wire length |
14 cm (5 wires) |
|
Supply voltage |
3.5-30V |
|
Display color |
Red + Blue |
|
Opening size: |
45 x 26 mm |
|
Phisical Dimensions |
48 x 29 x 26 mm |
|
Display mode |
Dual 0.28 LED digital tube |
|
Weight |
20g |
|
Shunt weight |
63g |
|
Shunt Dimensions |
120 x 25.5 x 14mm |
Instruction of wiring
Red thin wire (VCC): Power input+ 3.5-30V (NOTE: If the measuring signal is lower than 30V and have abundant power supply, it can be used as power supply for the module [black wire and yellow wire are contacted together to use])
Black thin wire(GND): Power input- Measurement signal - 3.5-30V
Yellow thin wire (VIN): Measurement signal+ (0-100V)
Red thick wire (I+): Current input+ (connect with the load negative)
Black thin wire(I-): Current input- (in series in power supply negative)